PC-ABS is available from stock in black & white.
For non stock colors a minimum of 40kg ± 10% is required.
PC-ABS is an incredibly strong filament with an even higher impact resistance than our regular ABS. This is a consequence of the addition of the proper amount of polycarbonate in this modification, which also creates a nearly perfect interlayer adhesion and a beautiful surface gloss. The above features, combined with a highly stable printing process makes PC-ABS the perfect material for mechanical parts and tools, which should be light and strong and show minimal wear after prolonged use.
- Improved interlayer adhesion
- High impact resistance
- High surface gloss
- Stable printing process
|MFI 240˚C/5 kg
|0,47 g/10 min
|Tensile strength at yield
|Tensile strength at break
|Elongation strain at break
|Elongation strain at yield
|Tensile (E) modulus
|Impact strength - Charpy method 23˚C
|Heat deflection temp.
Recommended temperature for heated bed is 100-110°C. We recommend kapton and / or pva glue stick for adhesion.
PC-ABS can be used on all common desktop FDM or FFF technology 3D printers.