Colors on request. Ask your account manager.


FGF Recycled PLA MATT is an easy to print variant on the everyday material PLA, with an aesthetical matt effect. Its surface diffuses light to give it a matt look and creates a rough feeling. PLA MATT is slightly abrasive, please consider using a hardened nozzle.


  • Matt effect, low light refraction
  • Easy to print rough surface
  • Reliable bed adhesion
  • Improved printing speed compared to PLA

Description Test method Typical value
Specific gravity ISO 1183 1,38 g/cc
MFR 200°C/5 kg ISO 1133 32,3 g/10min
Tensile strength at yield ISO 527 47 MPa
Tensile strength at break ISO 527 50 MPa
Elongation-strain at yield ISO 527 2,2%
Elongation-strain at break ISO 527 1,8%
Tensile modulus ISO 527 5750 Mpa
Impact strength - Charpy notched 23˚C ISO 179 1,9 kJ/m2
Vicat softening temperature ISO 306 58°C
Mold shrinkage internal method (ISO 294-4 based ) 0,09%
Description Typical value
Drying 6hr,50°C*. <250ppm
Zone 1 Temperature 180±20 °C
Zone 2 Temperature 190±20 °C
Zone 3 Temperature 200±20 °C
Mass temperature 209°C
Die temperature 210±20 °C


FGF recycled PLA MATT is available in 20kg bag

Additional information

*As PLA materials crystallize, it is advised to either have an agitated dryer, or dry at a lower temperature for a longer period. This avoids that the pellets stick to each other during drying. Please consider the use of a hardened steel nozzle and, if used, a gear pump, when printing with PLA MATT. The matting agent is mildly abrasive and will result in faster wear of brass nozzles


Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Get in touch