Colors
Colors on request. Ask your account manager.
FGF Recycled PC-ABS
PC-ABS is an incredibly strong material with an even higher impact resistance than our regular ABS. This is a consequence of the addition of the proper amount of polycarbonate in this modification, which also creates a nearly perfect interlayer adhesion and a beautiful surface gloss. The above features makes PC-ABS the perfect material for mechanical parts and tools, which should be light and strong and show minimal wear after prolonged use.
Features
- Improved interlayer adhesion
- High impact resistance
- High surface gloss
| Description | Test method | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,04 g/cc |
| MFR 240°C/5 kg | ISO 1133 | 0,47 g/10min |
| Tensile strength at yield | ISO 527 | 37 MPa |
| Tensile strength at break | ISO 527 | 30 Mpa |
| Elongation-strain at yield | ISO 527 | 3% |
| Elongation-strain at break | ISO 527 | 18% |
| Tensile modulus | ISO 527 | 1900 MPa |
| Impact strength - Charpy notched 23˚C | ISO 179 | 27 kJ/m2 |
| Vicat softening temperature | ISO 306 B50 | 61,7°C |
| Mold shrinkage | internal method (ISO 294-4 based ) | 0,35% |
| Description | Typical value |
|---|---|
| Drying | 3hr,90°C*. <400ppm |
| Zone 1 Temperature | 230±20 °C |
| Zone 2 Temperature | 240±20 °C |
| Zone 3 Temperature | 240±20 °C |
| Mass temperature | 245°C |
| Die temperature | 255±20 °C |
Packaging
FGF recycled PC-ABS is available in 20kg bag
Additional information
Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
