Colors
Colors on request. Ask your account manager.
FGF Recycled CARBON-P
CARBON-P is our carbon fiber reinforced PET-G based pellet material. The result is a more than twice as stiff material as PET-G. CARBON-P is suitable for a very wide variety of applications besides the typically mentioned RC parts, drones, automotive and more.
Features
- Carbon fiber reinforced PET-G
- Extremely stiff
- Increased impact
- No warping and dimensionally stable
- Matt surface
- Abrasive (see * at additional info*)
| Description | Test method | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,31 g/cc |
| MFR 240°C/5 kg | ISO 1133 | 3,8 g/10min |
| Tensile strength at yield | ISO 527 | 101 MPa |
| Tensile strength at break | ISO 527 | 100 Mpa |
| Elongation-strain at yield | ISO 527 | 2,7% |
| Elongation-strain at break | ISO 527 | 3,7% |
| Tensile modulus | ISO 527 | 9930 MPa |
| Impact strength - Charpy notched 23˚C | ISO 179 | 7 kJ/m2 |
| Vicat softening temperature | ISO 306 | 75°C |
| Mold shrinkage | internal method (ISO 294-4 based ) | 0,16% |
| Thermal expansion coëfficient | ISO 11359 | 7,3*10^-5 mm/mm°C |
| Description | Typical value |
|---|---|
| Drying | 6hr,70°C. <200ppm |
| Zone 1 Temperature | 220±20 °C |
| Zone 2 Temperature | 245±20 °C |
| Zone 3 Temperature | 220±20 °C |
| Mass temperature | 218°C |
| Die temperature | 220±20 °C |
Packaging
FGF recycled Carbon-P is available in 20kg bag
Additional information
Due to virtually no warping of CARBON-P, these pellets can also be printed without a heated bed. Please consider the use of a hardened steel nozzle and, if used, a gear pump, when printing with CARBON-P. The carbon fibers are abrasive and will result in fast wear of brass nozzles.
Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
