Colors on request. Ask your account manager.


FGF PLA Stone contains ~50% stone powder. The material is heavier than normal PLA and shows a nice matte finish. FGF PLA Stone shows excellent print results. It gives the feeling of real stone, because of the higher weight of the material.


  • Matt surface finish
  • Stone look
  • Heavier than normal PLA
  • Based on PLA

Description Test method Typical value
Specific gravity ISO 1183 1,7 g/cc
MFR 210°C/2,16 kg ISO 1133 5,6 g/10min
Tensile strength at yield ISO 527 44 MPa
Tensile strength at break ISO 527 44 Mpa
Elongation-strain at yield ISO 527 1,7%
Elongation-strain at break ISO 527 1,8%
Tensile modulus ISO 527 6365 MPa
Impact strength - Charpy notched 23˚C ISO 179 3,1 kJ/m2
Vicat softening temperature ISO 306 57,7˚C
Mold shrinkage internal method (ISO 294-4 based ) N/A
Description Typical value
Drying 8hr,50°C*. <250ppm
Zone 1 Temperature 160±20 °C
Zone 2 Temperature 175±20 °C
Zone 3 Temperature 185±20 °C
Mass temperature 197°C
Die temperature 195±20 °C


FGF PLA Stone is available in 20kg bag

Additional information

*As PLA materials crystallize, it is advised to either have an agitated dryer, or dry at a lower temperature for a
longer period. This avoids that the pellets stick to each other during drying.
The stone is mildly abrasive. Please consider the use of a hardened steel nozzle and, if used, a gear pump, when
printing with FGF PLA Stone. The stone powder is mildly abrasive and can result in faster wear of brass nozzles.


Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Get in touch