Colors on request. Ask your account manager.


CARBON-P is our 15% carbon fiber reinforced PET-G based material. The result is a more than twice as stiff pellets as PET-G with increased impact and heat resistance. This, together with other features, such as a matt surface, no warp, dimensionally stable and extremely forgiving to print, makes CARBON-P suitable for a very wide variety of applications.


  • 15% Carbon fiber reinforced PET-G
  • Extremely stiff
  • Increased impact
  • No warping and dimensionally stable
  • Matt surface
  • Abrasive (see * at additional info*)

Description Test method Typical value
Specific gravity ISO 1183 1,31 g/cc
MFR 200°C/5 kg ISO 1133 3,8 g/10min
Tensile strength at yield ISO 527 101 MPa
Tensile strength at break ISO 527 100 Mpa
Elongation-strain at yield ISO 527 2,7%
Elongation-strain at break ISO 527 3,7%
Tensile modulus ISO 527 9930 MPa
Impact strength - Charpy notched 23˚C ISO 179 7 kJ/m2
Vicat softening temperature ISO 306 B50 75°C
Mold shrinkage internal method (ISO 294-4 based ) 0,16%
Thermal expansion coëfficient ISO 11359 7,3*10^-5 mm/mm°C
Description Typical value
Drying 6hr,70°C. <200ppm
Zone 1 Temperature 220±20 °C
Zone 2 Temperature 245±20 °C
Zone 3 Temperature 220±20 °C
Mass temperature 218°C
Die temperature 220±20 °C


FGF CARBON-P is available in 20kg bag

Additional information

Due to virtually no warping of CARBON-P, these pellets can also be printed without a heated bed. Please consider the use of a hardened steel nozzle and, if used, a gear pump, when printing with CARBON-P. The carbon fibers are abrasive and will result in fast wear of brass nozzles.


Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Get in touch