Colors
ONE PET @Tridea is available from stock in 7 colors.
Standard
NA1 Natural Transparent
BK1 Black
WH1 White
BU2 Dark Blue
RD1 Red
GR1 Apple Green
SI1 Silver
ONE PET @TRIDEA
ONE PET @TRIDEA is a 100% recycled filament made from post condensed PET pellets that were collected and recycled from plastic waste in Brussels. ONE PET is the same material that plastic water bottles are made from. Where our regular PET-G has a better impact resistance ONE PET is a best solution when you need a stiff and tough material with excellent interlayer adhesion while still being easily printable.
Features
- Made from 100% recycled PET
- Excellent interlayer adhesion
- Strong & Stiff
- Almost no “warping”
- Food Contact Acceptable
- Odor neutral printing
| Size | ø Tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
| Description | Test method | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,16 g/cc |
| Tensile strength at yield | ISO 527 | 57 MPa |
| Tensile strength at break | ISO 527 | 46,3 MPa |
| Elongation strain at yield | ISO 527 | 6% |
| Elongation strain at break | ISO 527 | 370% |
| Tensile (E) modulus | ISO 527 | 2300 MPa |
| Flexural modulus | ISO 178 | 2020 MPa |
| Impact strength - Charpy method 23˚C (notched) | ISO 179 | 3,9 kJ/m² |
| Description | Test method | Typical value |
|---|---|---|
| printing temp. | Internal method | 245±10˚C |
Packaging
ONE PET @Tridea is available in nearly any type of packaging and labelling.Ask our team to help you customizing your product.
Additional information
Recommended temperature for heated bed is ≥70°C. Adhesion is possible on different surfaces. New spools come pre-dried but can quickly absorb moisture. Make sure to have a fully dried spool of filament before printing. We recommend drying for 24h at max. 65˚C (make sure the spool itself doesn’t deform). One Pet @Tridea can be used on most common desktop FDM or FFF technology 3D printers.