Colors

ARNITEL ID2060 HT is available from stock in:

Standard

BK1 Black

ARNITEL® ID2060 HT

ARNITEL® ID2060 HT is a new high-performance Thermoplastic Copolyester (TPC) for 3D printing using Fused Filament Fabrication (FFF). This filament is the first to offer a unique balance of flexibility, chemical resistance against exhaust gas recirculation (EGR) condensate and prolonged high temperature resistance for printing demanding automotive air-fuel and industrial applications.

Features:

  • First high temperature TPC filament on the market
  • A unique balance of flexibility, sustained high temperature
  • and chemical resistance
  • Prolonged high temperature performance: 175°C (1000 hrs),
  • 190°C (500 hrs)
  • Excellent chemical resistance against EGR condensates
  • Hardness of Shore D 61
Size ø Tolerance Roundness
1,75mm ø 0,05mm 95%
2,85mm ø 0,10mm 95%
Description Test method Typical value
Tensile modulus (X-X direction, flat) ISO 527-1/-2 230 MPa
Tensile modulus (X-X direction, on-edge) ISO 527-1/-2 240 MPa
Tensile modulus (Z-X direction, up-right) ISO 527-1/-2 220 MPa
Stress at break (X-X direction, flat) ISO 527-1/-2 21 MPa
Stress at break (X-X direction, on-edge) ISO 527-1/-2 35 MPa
Stress at break (Z-X direction, up-right) ISO 527-1/-2 20 MPa
Strain at break (X-X direction, flat) ISO 527-1/-2 245%
Strain at break (X-X direction, on-edge) ISO 527-1/-2 510%
Strain at break (Z-X direction, up-right) ISO 527-1/-2 55%
Description Test method Typical value
printing temp. Internal method 230±10˚C

Packaging

ARNITEL®ID2060 HT @DSM is available in the original packaging of DSM.

Additional information

Arnitel® ID2060 HT is the first high performance TPC FFF material combining flexibility with prolonged high temperature use, chemical resistance and strength. This combination makes it suitable to print cold charge air ducts for demanding automotive under the hood applications as well as components for end-of-arm tooling. Parts printed can resist sustained high-temperature of 175°C (1000 hrs) or 190°C (500 hrs) and chemicals such as EGR condensate.

Storage

In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged. For the same reason, partially used bags should be sealed before re-storage. Allow the material that has been stored elsewhere to adapt to the temperature in the processing room while keeping the bag closed.

Downloads