Colors
PA-CX12 is available from stock in clear, white and black. For other colors a minimum of 40kg ± 10% is required.
Standard
CL1 Clear
BK1 Black
WH1 White
PA-CX12 NYLON
PA-CX12 is our high-performance nylon filament with a broad range of mechanical and chemical properties. These properties include but are not limited to, high impact (even at low temperatures), crack & scratch resistance, food/water contact acceptable, superior chemical & weathering resistance backed by a very low water absorption and excellent dimensional stability. PA-CX12 is the perfect nylon filament for the (semi)professional print user who is looking for the perfect combination of printability and mechanical properties. PA-CX12 is one of the best solutions for industrial grade applications that need to last.
Features:
- High-performance industrial grade nylon
- Strong & Flexible
- High impact, abrasion, crack & scratch resistance
- Superior chemical & UV resistance
- Excellent dimensional stability
- Low water absorption
| Size | ø Tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
| Description | Test method | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,02 g/cc |
| MFI 280ºC/2,16 kg | ISO 1133 | 15 g/10 min |
| Tensile strength at yield | ISO 527 | 60 MPa |
| Elongation strain at yield | ISO 527 | 8% |
| Elongation strain at break | ISO 527 | 50% |
| Tensile (E) modulus | ISO 527 | 1400 MPa |
| Impact strength - Charpy notched 23˚C | ISO 179 | 14 kJ/m² |
| Shore hardness | ISO 868 | 81D |
| Moisture absorption | ISO 62 | 3,5% |
| Vicat softening temp. | ISO 306 B50 | 110°C |
| Melting point | ISO 11357 | 250±10°C |
| Description | Test method | Typical value |
|---|---|---|
| printing temp. | Internal method | 260±10˚C |
Packaging
PA-CX12 is available in nearly any type of packaging and labelling, but will always be supplied in a vacuum bag, due to the moisture sensitivity of Polyamides. Ask our team to help you customizing your product.Additional information
PA-CX12 needs to be dried for good 3D print results.
A standard air-circulated oven is sufficient. A guideline for drying is 2-3 hours at 110-130˚C for 100 gram (Do not apply a load to the spool when drying, or else the spool can deform. Check if your spool shows signs of deformation. If so, lower the temperature).
Recommended temperature for heated bed is ≥100°C.
PA-CX12 will not bond perfect to glass, but adheres well to a variety of “print stickers” and other bed adhesives.
PA-CX12 can be used on most common desktop FDM or FFF technology 3D printers.