Colors
GLASSBEND is available from stock in clear.
For non stock colors a minimum of 40kg ± 10% is required.
Standard
CL1 Clear
GLASSBEND
GLASSBEND is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications.
Features:
- 92% light transmission, so very bright
- Strong and flexible
- Very good interlayer adhesion
- No crazing when bent
- Food Contact Acceptable
- Almost no ”warping”
| Size | ø Tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
| Description | Test method | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,01 g/cc |
| MFI 200˚C/5kg | ISO 1133 | 7,5 g/10 min |
| Tensile strength at yield | ISO 527 | 26 MPa |
| Elongation strain at break | ISO 527 | 230% |
| Flexural modulus | ISO 178 | 1795 MPa |
| Instr. Dart Impact (23˚C, 3,18mm TE) | ASTM 3763 | 40,0 J |
| Shore D hardness | ISO 868 | 63 |
| Light transmission | ASTM D1003 | 92% |
| Melting temp. | ISO 294 | 205±30°C |
| Vicat softening temp. | ISO 306 A50 | 85°C |
| Description | Test method | Typical value |
|---|---|---|
| printing temp. | Internal method | 270±10˚C |
Packaging
GLASSBEND is available in nearly any type of packaging and labelling. Ask our team to help you customizing your product.Additional information
Recommended temperature for heated bed is ≥100°C. Adhesion is possible on different surfaces.
GLASSBEND can be used on all common desktop FDM or FFF technology 3D printers.