



































Colors
PLA MATTE is available from stock in the following colors.
For non stock colors a minimum of 40kg ± 10% is required.
Matte
PLA MATT
PLA MATT is an easy to print variant on the everyday material PLA and exists for >70% out of recycled Post-Industrial PLA. Its surface diffuses light to give it a matt look and creates a rough feeling. PLA matte is slightly abrasive, please consider using a hardened nozzle. This material can be printed on most common printers and has a reliable bed adhesion to most common build plate materials.
Features:
- Matt effect, low light refraction
- Easy to print rough surface
- Reliable bed adhesion
- Improved printing speed compared to PLA
Size | ø Tolerance | Roundness |
---|---|---|
1,75mm | ø 0,05mm | 95% |
2,85mm | ø 0,10mm | 95% |
Description | Test method | Typical value |
---|---|---|
Specific gravity | ISO 1183 | 1,4 g/cc |
MFI 210°C/2,16 kg | ISO 1183 | 17 gr/10 min |
Tensile strength at yield | ISO 527 | 46,6 MPa |
Elongation strain at yield | ISO 527 | 1,8% |
Tensile (E) modulus | ISO 527 | 5740 MPa |
Description | Test method | Typical value |
---|---|---|
printing temp. | Internal method | 215±10˚C |
Packaging
Additional information
Due to its low tendency to warp PLA MATT can also be printed without a heated bed. If you have a heated bed the recommended temperature is ≤60°C. PLA MATT can be used on all common desktop FDM or FFF technology 3D printers.